4Information

Development status of automatic soldering machine


Soldering robot, as its name implies, is a kind of soldering equipment, so besides the motion function of the manipulator, its main task is to complete soldering operation. So the core part of soldering robot is welding system. Soldering system is mainly composed of automatic tin feeding mechanism and temperature control, heating body and iron head. Domestic brand soldering robot has been successfully applied in automotive electronics, digital, electronic, electroacoustic, LCD, circuit board and other production industries.

Matters needing attention

During soldering operation, the solder joint should not be too saturated. It should be in the middle of three or four points. Otherwise, if the solder spot is too large, it will easily break off with the solder joint next to it. Tin should be small and semi-circular with the component foot, so that the soldered circuit board is neat and good. Moreover, the lead wire of soldering machine should not be too thin and long, and the voltage drop during soldering should not be greater than 5% of the initial voltage, and gloves and protective glasses should be worn when operating. The soldering machine should not clean the soldering nozzle on sponge during use, but only put the tin on the soldering nozzle into the tin carton so as to keep the temperature of the soldering nozzle from dropping rapidly. Later, after the soldering machine is used up every day, it should be cleaned first, then added tin, and then cut off the power supply immediately, which will help to increase the service life of the machine.

Official App
Professional winding automation equipment manufacturers